| Peer-Reviewed

Simulation of Cracking in High Concrete Gravity Dam Using the Extended Finite Elements by ABAQUS

Received: 8 December 2019     Accepted: 30 December 2019     Published: 8 January 2020
Views:       Downloads:
Abstract

China's energy demand is growing rapidly and large hydropower plants are becoming more common. This therefore has resulted in the building of many large concrete dams across the country. Significant dam cracking can have major environmental, economic and social consequences. Collapse of High concrete dam may cause serious harm to economic development as well as safety of the people; thereby necessitating the need for research on safety and stability of high concrete dam under high water and seismic conditions. In this paper, the high concrete dam of Longtan was used as an example, using the ABAQUS program based on the extended finite element method to analyze the Longtan Dam under static and dynamic conditions which has been commonly used for the study of crack growth. A numerical prediction of crack propagation in concrete gravity dams is presented. The two-dimensional seismic numerical study was done using acceleration-time records from Koyna earthquake in 1976 Dam concrete cracking range and cracking were discussed during a seismic time. The locations that are easy to generate cracks are illustrated from the analysis and the findings showed that, during seismic activity the Longtan Dam was rather unsafe. The results of the work can provide a valuable guide for the design and operation of the dam system.

Published in American Journal of Mechanics and Applications (Volume 8, Issue 1)
DOI 10.11648/j.ajma.20200801.12
Page(s) 7-15
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2020. Published by Science Publishing Group

Keywords

Gravity Dam, Crack, XFEM, Abaqus

References
[1] M. F. Kaplan, “Crack propagation and the fracture of concrete,” in Journal Proceedings, 1961, vol. 58, no. 11, pp. 591–610.
[2] T. Belytschko and T. Black, “Elastic crack growth in finite elements with minimal remeshing,” Int. J. Numer. Methods Eng., vol. 45, no. 5, pp. 601–620, 1999.
[3] F. L. Stazi, E. Budyn, J. Chessa, and T. Belytschko, “An extended finite element method with higher-order elements for curved cracks,” Comput. Mech., vol. 31, no. 1–2, pp. 38–48, 2003.
[4] J. J. C. Remmers, R. de Borst, and A. Needleman, “The simulation of dynamic crack propagation using the cohesive segments method,” J. Mech. Phys. Solids, vol. 56, no. 1, pp. 70–92, 2008.
[5] A. Hansbo and P. Hansbo, “A finite element method for the simulation of strong and weak discontinuities in solid mechanics,” Comput. Methods Appl. Mech. Eng., vol. 193, no. 33–35, pp. 3523–3540, 2004.
[6] J. Song, P. M. A. Areias, and T. Belytschko, “A method for dynamic crack and shear band propagation with phantom nodes,” Int. J. Numer. Methods Eng., vol. 67, no. 6, pp. 868–893, 2006.
[7] N. Moës and T. Belytschko, “Extended finite element method for cohesive crack growth,” Eng. Fract. Mech., vol. 69, no. 7, pp. 813–833, 2002.
[8] N. Moës, J. Dolbow, and T. Belytschko, “A finite element method for crack growth without remeshing,” Int. J. Numer. Methods Eng., vol. 46, no. 1, pp. 131–150, 1999.
[9] D. Motamedi and S. Mohammadi, “Dynamic analysis of fixed cracks in composites by the extended finite element method,” Eng. Fract. Mech., vol. 77, no. 17, pp. 3373–3393, 2010.
[10] I. Nistor, O. Pantalé, and S. Caperaa, “Numerical implementation of the extended finite element method for dynamic crack analysis,” Adv. Eng. Softw., vol. 39, no. 7, pp. 573–587, 2008.
[11] O. A. Pekau and C. Yuzhu, “Failure analysis of fractured dams during earthquakes by DEM,” Eng. Struct., vol. 26, no. 10, pp. 1483–1502, 2004.
[12] F. Javanmardi, P. Léger, and R. Tinawi, “Seismic structural stability of concrete gravity dams considering transient uplift pressures in cracks,” Eng. Struct., vol. 27, no. 4, pp. 616–628, 2005.
[13] J. Wang, G. Lin, and J. Liu, “Static and dynamic stability analysis using 3D-DDA with incision body scheme,” Earthq. Eng. Eng. Vib., vol. 5, no. 2, pp. 273–283, 2006.
[14] O. A. Pekau and X. Zhu, “Three-degree-of-freedom rigid model for seismic analysis of cracked concrete gravity dams,” J. Eng. Mech., vol. 132, no. 9, pp. 979–989, 2006.
[15] X. Zhu and O. A. Pekau, “Seismic behavior of concrete gravity dams with penetrated cracks and equivalent impact damping,” Eng. Struct., vol. 29, no. 3, pp. 336–345, 2007.
[16] M. Mirzayee, N. Khaji, and M. T. Ahmadi, “A hybrid distinct element–boundary element approach for seismic analysis of cracked concrete gravity dam–reservoir systems,” Soil Dyn. Earthq. Eng., vol. 31, no. 10, pp. 1347–1356, 2011.
[17] J. M. Melenk and I. Babuška, “The partition of unity finite element method: basic theory and applications,” Comput. Methods Appl. Mech. Eng., vol. 139, no. 1–4, pp. 289–314, 1996.
[18] S. Abaqus, “6.11. ABAQUS,” CAE User’s Man., 2011.
[19] S. Zhang, G. Wang, and X. Yu, “Seismic cracking analysis of concrete gravity dams with initial cracks using the extended finite element method,” Eng. Struct., vol. 56, pp. 528–543, 2013.
[20] D. C. Simulia and S. ABAQUS, “6.11 analysis user’s manual,” Provid. RI, 2011.
[21] N. Sukumar, Z. Y. Huang, J. Prévost, and Z. Suo, “Partition of unity enrichment for bimaterial interface cracks,” Int. J. Numer. Methods Eng., vol. 59, no. 8, pp. 1075–1102, 2004.
[22] N. Sukumar and J.-H. Prévost, “Modeling quasi-static crack growth with the extended finite element method Part I: Computer implementation,” Int. J. Solids Struct., vol. 40, no. 26, pp. 7513–7537, 2003.
[23] T. Elguedj, A. Gravouil, and A. Combescure, “Appropriate extended functions for X-FEM simulation of plastic fracture mechanics,” Comput. Methods Appl. Mech. Eng., vol. 195, no. 7–8, pp. 501–515, 2006.
[24] S. Mridha and D. Maity, “Experimental investigation on nonlinear dynamic response of concrete gravity dam-reservoir system,” Eng. Struct., vol. 80, pp. 289–297, 2014.
[25] H. Mohammadnezhad, M. Ghaemian, and A. Noorzad, “Seismic analysis of dam-foundation-reservoir system including the effects of foundation mass and radiation damping,” Earthq. Eng. Eng. Vib., vol. 18, no. 1, pp. 203–218, 2019, doi: 10.1007/s11803-019-0499-4.
[26] A. Pirooznia, “Seismic Improvement of Gravity Dams Using Isolation Layer in Contact Area of Dam–Reservoir in Smeared Crack Approach,” Iran. J. Sci. Technol. - Trans. Civ. Eng., vol. 43, no. 2, pp. 137–155, 2019, doi: 10.1007/s40996-018-0111-6.
Cite This Article
  • APA Style

    Albaadani Ghallab. (2020). Simulation of Cracking in High Concrete Gravity Dam Using the Extended Finite Elements by ABAQUS. American Journal of Mechanics and Applications, 8(1), 7-15. https://doi.org/10.11648/j.ajma.20200801.12

    Copy | Download

    ACS Style

    Albaadani Ghallab. Simulation of Cracking in High Concrete Gravity Dam Using the Extended Finite Elements by ABAQUS. Am. J. Mech. Appl. 2020, 8(1), 7-15. doi: 10.11648/j.ajma.20200801.12

    Copy | Download

    AMA Style

    Albaadani Ghallab. Simulation of Cracking in High Concrete Gravity Dam Using the Extended Finite Elements by ABAQUS. Am J Mech Appl. 2020;8(1):7-15. doi: 10.11648/j.ajma.20200801.12

    Copy | Download

  • @article{10.11648/j.ajma.20200801.12,
      author = {Albaadani Ghallab},
      title = {Simulation of Cracking in High Concrete Gravity Dam Using the Extended Finite Elements by ABAQUS},
      journal = {American Journal of Mechanics and Applications},
      volume = {8},
      number = {1},
      pages = {7-15},
      doi = {10.11648/j.ajma.20200801.12},
      url = {https://doi.org/10.11648/j.ajma.20200801.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajma.20200801.12},
      abstract = {China's energy demand is growing rapidly and large hydropower plants are becoming more common. This therefore has resulted in the building of many large concrete dams across the country. Significant dam cracking can have major environmental, economic and social consequences. Collapse of High concrete dam may cause serious harm to economic development as well as safety of the people; thereby necessitating the need for research on safety and stability of high concrete dam under high water and seismic conditions. In this paper, the high concrete dam of Longtan was used as an example, using the ABAQUS program based on the extended finite element method to analyze the Longtan Dam under static and dynamic conditions which has been commonly used for the study of crack growth. A numerical prediction of crack propagation in concrete gravity dams is presented. The two-dimensional seismic numerical study was done using acceleration-time records from Koyna earthquake in 1976 Dam concrete cracking range and cracking were discussed during a seismic time. The locations that are easy to generate cracks are illustrated from the analysis and the findings showed that, during seismic activity the Longtan Dam was rather unsafe. The results of the work can provide a valuable guide for the design and operation of the dam system.},
     year = {2020}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Simulation of Cracking in High Concrete Gravity Dam Using the Extended Finite Elements by ABAQUS
    AU  - Albaadani Ghallab
    Y1  - 2020/01/08
    PY  - 2020
    N1  - https://doi.org/10.11648/j.ajma.20200801.12
    DO  - 10.11648/j.ajma.20200801.12
    T2  - American Journal of Mechanics and Applications
    JF  - American Journal of Mechanics and Applications
    JO  - American Journal of Mechanics and Applications
    SP  - 7
    EP  - 15
    PB  - Science Publishing Group
    SN  - 2376-6131
    UR  - https://doi.org/10.11648/j.ajma.20200801.12
    AB  - China's energy demand is growing rapidly and large hydropower plants are becoming more common. This therefore has resulted in the building of many large concrete dams across the country. Significant dam cracking can have major environmental, economic and social consequences. Collapse of High concrete dam may cause serious harm to economic development as well as safety of the people; thereby necessitating the need for research on safety and stability of high concrete dam under high water and seismic conditions. In this paper, the high concrete dam of Longtan was used as an example, using the ABAQUS program based on the extended finite element method to analyze the Longtan Dam under static and dynamic conditions which has been commonly used for the study of crack growth. A numerical prediction of crack propagation in concrete gravity dams is presented. The two-dimensional seismic numerical study was done using acceleration-time records from Koyna earthquake in 1976 Dam concrete cracking range and cracking were discussed during a seismic time. The locations that are easy to generate cracks are illustrated from the analysis and the findings showed that, during seismic activity the Longtan Dam was rather unsafe. The results of the work can provide a valuable guide for the design and operation of the dam system.
    VL  - 8
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Engineering Mechanics, Hohai University, Nanjing, China

  • Sections